ARTICLE
Volume 4,Issue 7
20 July 2026
大型锥形双体LNG储罐制作工艺
龙 郑1 ,
桂勇 阮1
Show Less
1
武汉一冶钢结构有限责任公司,
中国
ERA 2026 , 4(7), 19–24;
https://doi.org/10.61369/ERA.2026070015
© 2026 by the Author(s). Licensee Art and Technology, USA. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution -Noncommercial 4.0 International License (CC BY-NC 4.0) ( https://creativecommons.org/licenses/by-nc/4.0/ )
Abstract
C型双耳储罐的设计使得其能够最大限度地利用船体空间，提高空间利用率至少40%，但是在船首位置的空间，常规设计使得其未被完全利用。在国内建造的78900m³LNG运输船储罐工程中，船首部位的罐体设计成锥形后，就能将船首空间得到较好地利用，但是C型双耳锥形罐的制作在国内尚属首次；本文结合国内78900m³LNG运输船储罐建造阐述C型双耳锥形储罐的制作。
Keywords
大型C型双耳锥形储罐
低温
组装
焊接
试验
References
[1] GB/T150-2024 压力容器[S].
[2] 《IGC规则》[S].
[3] 中国船级社《散装运输液化气体船舶构造与设备规范》2022[S].
Share
Back to top
Art and Technology
We are committed to support the scientific community by publishing impactful research and enhancing communication among scientists. At Art and Technology, we are continuously looking for ways to accelerate scientific progress and to strive for transparency and open communication, making knowledge freely accessible without barrier.
Contact us: editorial@arttechpress.com
263 S KENWOOD ST 560 CASPER,WY 82601