ARTICLE
28 March 2026

基于相对总变差的涡轮叶片 CT 图像环状伪影矫正算法

浩 江1 嘉昳 赵2
Show Less
1 中国矿业大学(北京), 中国
2 中国航空综合技术研究所, 中国
© 2026 by the Author(s). Licensee Art and Technology, USA. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution -Noncommercial 4.0 International License (CC BY-NC 4.0) ( https://creativecommons.org/licenses/by-nc/4.0/ )
Abstract

针对涡轮叶片在进行工业计算机断层扫描 (Industrial Computed Tomography,ICT) 无损检测时出现的环状伪影,本文提出基于相对总变差的霍夫直线变换算法来进行环状伪影的识别与定位。通过计算图像的相对总变差实现图像结构信息和伪影纹理的分离,并将伪影纹理作为后续霍夫变换的处理对象,减少检测物像素信息对霍夫变换的干扰,提升检测精度。实测图像表明,采用相对总变差进行伪影纹理分离后,检测到的有效伪影直线数量大幅提升,且减少了常规霍夫变换算法的误检现象。

Keywords
相对总变差
涡轮叶片
CT 图像
环状伪影
矫正算法
References

[1] 刘茜 , 胡殿印 , 王怡 , 等.航空发动机结构可靠性设计研究进展与展望 [J].航空学报 , 2025, 46(21): 23-47.

[2] 汤捷中.浅谈航空发动机叶片的检测与维修 [J].内燃机与配件 , 2023(17): 64-66.

[3]Wu J J, Meng J, Zou M K, et al. Effect of wall thickness on micropores and stress-rupture properties of a single-crystal nickel-based superalloy[J]. Materials Science and Engineering: A, 2023, 872: 144941.

[4]Kargarnejad S, Djavanroodi F. Failure assessment of Nimonic 80A gas turbine blade[J]. Engineering Failure Analysis, 2012, 26: 211-219.

[5]Nie W, Yang X, Zhang K, et al. Test rig and experimental Investigation on the blade containment of aero-engine turbine casing[J]. Engineering Failure Analysis, 2025,178: 109726.

[6] 苏宇航 , 王倩妮 , 张于北.中国机械工程学会.航空发动机叶片高能工业 ct 壁厚测量数据自动校准方法 [J].2013: 874-878.

[7]Tang Z, Li L, Li H, et al. Effect of curvature radius on leading edge cooling performance of double wall turbine blade[J]. International Journal of Thermal Sciences, 2025,210: 109621.

[8] 李静 , 郑良 , 陈璐杰 , 等.基于三维运动轨迹的高分辨显微 ct 环状伪影去除方法 [J].中国医疗设备 , 2020(1): 56-60.

[9] 魏英 , 吴文晋 , 杨民 . 基于多项式拟合的 CT 图像环状伪影校正 [J]. 北京信息科技大学学报 ( 自然科学版), 2010(04): 45-48.

[10]Hang J, Han J, Zhang Y, et al. Ring artifact suppression and removal algorithm for an X-ray cone beam CT system[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2025, 1072: 170217.

[11]Li F, Li Y, Wang Z, et al. Data-driven and model-guided iterative reconstruction framework for simultaneous sparse-view and ring artifact reduction in synchrotron X-ray microtomography[J]. Optics Express, 2025, 33(2): 3145.

[12] 周意超 , 谢明元 , 杨玲 , 等.CT 环状伪影矫正方法的改进研究 [J]. 四川大学学报(医学版), 2016, 47(3): 420-424.

[13] 刘必成 , 易茜 , 宗春光 , 等.基于梯度特征聚类分析的大尺寸物体 CT 图像环状伪影校正方法 [J].CT 理论与应用研究 , 2024(6): 781-789.

[14] 朱腾 , 阎汉生 , 张坡 , 等.基于模糊 hough 变换的增强现实目标位姿监测算法 [J].科技通报 , 2025(01): 23-27.

[15]Yang Y, Zhang D, Yang F, et al. Post-processing method for the removal of mixed ring artifacts in CT images[J]. Optics Express, 2020, 28(21): 30362.

Share
Back to top